 |
| Horsepower: | 290 @ 5100 RPM |
| Torque: | 326 @ 3750 RPM |
| Compression Ratio: | 8.5:1 |
| Block: | Cast Iron 4-Bolt Main |
| Crankshaft: | Nodular Iron |
| Heads, Chamber Size: | Cast Iron, 76cc |
| Valves (I/E): | 1.94"/1.50" |
| Camshaft, Lift (I/E): | .450"/.460" |
| Camshaft Duration @ 0.050" I/E: | 222°/222° |
| Intake Manifold: | Not Included |
 |
-
Holley 950' 4150 serie
-
Dart Big "M" 9.8" Block w/Splayed 4-Bolt Main Caps
- Eagle 4340 4.375" Stroke Steel Crank
-
Eagle 4340 6.535" H-Beam Steel Rods
-
ARP w/L19 Rod Bolts
- Clevite 77 "H" Series Main & Rod Bearings
- JE Custom 10.5-1 Forged Aluminum Pistons
- Speed Pro Plasma Moly Ring Set
- SSRE/Comp Cams Custom "Street Roller" Camshaft
- Severe Duty "Hippo" Roller Lifters w/Pin Oiling (Forlænger løfternes levetid)
- Cloyes Billet True Roller Timing Set w/Torrington Bearing
-
Dart Pro 1 345cc Aluminum Heads
-
Cometic MLS (Multi Layered Steel) Head Gaskets
- 1.550" Roller Springs w/Steel Retainers Manley Chromemoly Head Bolts & Heat Treated Washers
- Comp Cams 1.7 Pro Magnum Roller Rockers
- FelPro HP Head Gaskets w/Pre-Flattened Steel Wire
- Edelbrock "Victor Series" Aluminum Intake
- SSRE/Moroso Stroker Street/Strip Oil Pan w/Windage Tray
- Moroso Race Prepped Oil Pump w/Tig Welded HD Pickup
- GM Performance Chrome Front Cover w/Billet Timing Pointer
-
SFI Harmonic Balancer (Required At All Race Tracks)
-
SFI Flex Plate w/ARP Bolts (Required At All Racetracks)
- Complete Assembly Internally Balanced
-
Individually Dyno Tested & Tuned
-
Actual Dyno Sheet Provided
Vi er leveringsdygtige i motore fra 150-2500+hk, alle til street / strip brug. 95 Octan. standart sug, kompressor, twin turbo. Du bestemmer.
 |
Technical Specs:
• Seasoned GM 4-Bolt Main (2 pc. rear main seal) Short Block
• Patriot Performance 190cc Freedom Series Straight Plug Heads
• Scat Crank and I Beam Rods
• Hypereutectic Pistons
• Fel-Pro Head Gaskets
• New Head Bolts and Hardened Washers
• HEI Distributor with 50,000 Vo;t Coil
• Aluminum Water Pump
• Edelbrock Air Gap Intake Port Matched to Heads
• Double Roller Timing Chain
• Polished Aluminum Valve Covers
• Roller Rockers
• Hardened Pushrods
• Hydraulic Roller Camshaft
• 10.3-1 Compression
 |
Ford Small block 347cui motor med 425hk & 535nm.
Bygget til og kunne bruges til søndags tur med familien eller som en " frisk " gade bils motor.
En rigtig fin motor til billige penge.
Der medfølger indsug, strømfordeler og alu vandpumpe.
OBS. leveringstiden heder ca 3-5 uger
Se motor info her under.
• Seasoned Ford Bare Block
• Patriot Performance 185cc Freedom Series Heads
• Eagle Crank and I Beam Rods
• Forged Pistons
• Fel-Pro Head Gaskets
• New Head Bolts and Hardened Washers
• MSD Distributor
• Aluminum Water Pump
• Edelbrock Victor Jr. Intake Port Matched to Heads
• Double Roller Timing Chain
• Polished Aluminum Valve Covers
• Scorpion Roller Rockers
• Hardened Pushrods
• Howards Hydraulic Roller Camshaft
• 10.0-1 Compression
 |
Custom bygget Motorer. Kan fås med 6-71 / 8-7 eller procharger kompressor. Kan bygges med op til 13-1400hk på 98 octane og op til 2500hk på race benzin.
Rigtig mange muligheder for opgraderinger og special tuning.
Ring for pris på en motor der passer dit behov.